This is not a Premeux Web page.  It is posted only to help those who might be considering a Premeux fairing or tourpak for their Kawasaki Nomad.   The posted questions are from the Delphi Vulcan Forum, answers are direct from Premeux.

Question	If anyone with a camera and Premeux accessories can get pictures of theirs  mounted, can you show them off? Especially the lower fairings and the fairings inner dash.
Answer	See photos below
Question	I have specific concerns about the lower fairings and how my 9" forwards might be affected by them. How close is the closest part of the stock floorboard/brake pedal to the lowers?
Answer	We do not know if forward control could fit in the lower but I will measure the actual pedal and give you close-up picture of the inside  of the shell. (coming soon)
Question	Do risers other than stock having enough clearance with the upper fairing. I have 4x1 risers.
Answer	Any kind of risers that are full back will fit good on it but if they are straight it will interfere with the fairing.
Question	What about buffeting when the stock or oversize lowers are removed. Do you get by  with just the upper and lower fairing?
Answer	We drove the bike up to 90 miles an hour with only the upper fairing and the bike was more stable than without it. We never tried it with only the lower fairing on it.  Maybe some people did and we never received any complaint about it. With both fairings the bike is more stable on the road especially at high speed.
Question	Are windshield heights optional, what are the heights and where is the reference measured from (top of gauge cluster)?
Answer	The standard windshield that comes with the fairing is 9" height and the measurement from the center of the handlebar between the riser and bottom of the windshield is 9" for a total of 18" from the handlebar. All our windshields are precut from the factory and are Lexan anti-scratch. When you are sit on the bike, your eyes must be over the windshield.  The way to determine the proper height is to put small 1/8" tape every 1/2" and you look directly in front of you.   When you find  which line you focus on best you cut 1/2" lower and you have the perfect height. Any glass shop will cut your windshield for around $10.00.
Question	The saddlebag fillers (see photo below)  where do they mount? Do they get in the way of saddlebag removal?
Answer	The fillers are attached to the last bolt of the side strut and to the lower bar at the end of the fender with a clamp, It will not interfere with the saddlebags at any time. The only time you cannot install the fillers is if you have a bumper or a hitch.
Question	Is a non stock fender required when mounting the radiator shroud?
Answer	Any kind of fender will fit with the radiator shroud.

Click Thumbnails For Larger Photos

If you have further questions or need pricing information feel free to contact Serge ( Serge@premeux.com )