Signal Modification LED's from Electrical Connection
www.electricalconnection.com

This is what you get in the package for Part #01315. However it is my understanding the design has changed and the LED's are no in a full circle.
2-Boards with 6 (or more) Red LED lights each
Assorted electrical connectors
Wiring Harness, Instructions (not shown)

Lights in "running down the road" mode
Note, you use the original yellow lenses but the LED's are red and bright enough to override the lens color keeping the bike legal with rear facing brake and running lights all appearing red.

Left Turn Signal On
Note, when stock light bulb blinks, LED's are off so blinking side is yellow (same as stock) Non blinking side appears red

Brakes On (shot in dark so brightness can be compared to stock brake light)

All in all I guess I give this one a 6 on a 1-10 scale. (I'm tough to impress) The additional lighting will probably not have a big impact on drivers following you during the day. At night, however, the difference could be the edge that saves your life.

Installation was a little tough not because of the product but because the Kawasaki turn signal is so well built. It is a bit of a project to get it apart. Disassembly is necessary to sandwich thin wires from LED circuit boards between stock bulb socket and signal housing for routing to bike wiring. I would strongly suggest filing a channel for the LED wiring either in the turn signal 'tube' where the socket mounts or in the socket itself. This will let you re-assemble the socket assembly without squeezing, stretching or otherwise straining the small LED wires and possibly causing a hard to track down short.

A lift makes the job a bit easier because the rear tire is hanging down out of the way making access to under fender wiring much simpler.

I ran wiring all the way under the fender and connected to running and brake light wiring under the seat. I also soldered all connections. Most will find it simpler to dismount the stock brake light housing and just attach to wiring there with the supplied connectors.

Cheers

Gadget

Gadgets Fixit Page

Gadget

LED

Mod